When these kinds of circuits were installed several years ago, there wasn't the large demand on electricity like there is in the modern day home today. All my kids have laptops, TV's, DVD players, Playstaions etc. or anything else. Old circuit boards simply can't overcome the demand of the present day day home. Get the idea checked.

Fuse Boards - if your fuse box looks old and dated and it uses copper wiring then obtain it checked straight away, again, old fuse boxes simply can't cope and will be prone to blowing on a regular basis.

What you need is a professional electrician who can check your electrics, rewire your house properly making sure it has all the essential safety certificates which are often extremely useful when selling your home. If you need qualified and professional electricians within Stoke on Trent then look no further than Copeland's Electrical Services.
.


http://colbycrane410.over-blog.com/pages/eastbourne-electricians-6677791.html, http://horaceknapp921.skyrock.com/3069923473-Is-It-Time-to-Upgrade-the-Fuse-Box-in-Your-House.html, http://eastbourneelectrician35.onsugar.com/manage/newRehabbing a home assembled between 1965 - 1973? Chances are the house has light weight aluminum wiring. If so, you need to know how to deal with this particular situation so your costs are covered and make sure the home is safe since working with aluminum wiring has to be treated differently than with copper wiring.

So why did they start using aluminum in the first place?

Aluminum wiring was installed in the vast majority of homes built between 1965 - 1973 since high use of copper with the military during the Vietnam War. This made obtaining office assistant wire difficult and costly. The alternative was aluminum wiring that's plentiful and cheap, but the potential chance it posed was not recognized at the time.

What makes aluminum wiring more serious that copper?

Aluminum naturally is a softer metal that copper, it contracts and expands more when heated and it is more susceptible to oxidation, the industry thin film on it's surface brought on by oxygen. It should be noted that the pertains to only to the smaller single wires that you see on wall receptacles and switches. The aluminum stranded wiring so you see on the 220 volt appliance and air conditioning circuits do not pose a problem. When aluminum wires are only twisted together, like you would probably with copper, the wires expand and contract then current flows through them which produces heat from the poor connection and if the wires has oxidized, this will heat up the connection even further, causing a potential for overheating and then a possible fire.

How can i tell if the property has aluminum wiring?

The easiest method to know is to obtain it verified by an electrician or home inspector. You should check yourself but of path, you need to be careful. I do not suggest that you remove the breaker panel cover that can show all the wiring from the circuits, but you could turn the breaker off to a room and remove the cover plates to the light switches and containers and loosen the anchoring screws that hold them in the electrical box. Pull the switch and also receptacle out and glance at the bare wire around the web link screw. Aluminum will get bright silver. This is not to remain confused with tinned copper wiring that has a dull silver finish, but this was used in a much earlier time.